MENU
Inquiry

Injection 1015GC9

Engineering Plastics
Dry as molded
Characteristic Unit Test method Measured value
Mechanical Characteristics
Tensile strength MPa  ISO 527-1,2 225
Tensile strain at break % 3.3
Tensile modulus GPa 14.2
Flexural strength MPa  ISO 178 350
Flexural modulus GPa 13.4
Charpy notched impact strength kJ/m2  ISO 179-1/1eA 20
Rockwell hardness R.Scale -  ISO 2039-2 120
M.Scale 100
Thermal Characteristics
Melting temperature °C  ISO 11357 215~225
Coeff. of linear thermal expansion x10-5/°C  ISO 11359-2 2.0
Temperature of deflection under load 0.45 MPa °C  ISO 75-1,2 220
1.8 MPa °C 210
Electical Characterisitics
Volume resistivity Ωcm  JIS K6911 -
Electric strength kV/mm  IEC 60243-1 -
Relative permittivity -  IEC 60250 3.9
Arc resitance s  D-495(ASTM) 138
Others
Density g/cm3  ISO 1183-3 1.50
Water absorption 23 °C, 50 %RH %  UBE method 1.3
Molding shrinkage MD %  UBE method(30x100x3t) 0.1
TD 0.5
Nomenclature accdording to ISO 16396-1 PA6, GF45. M1, S14-140