Dry as molded
  Unit Test method Measured value
Density g/cm3  ISO 1183-3 1.14
Tensile stress at break MPa  ISO 527-1,2 86
Tensile modulus MPa  ISO 527-1,2 3,450
Tensile strain at break %  ISO 527-1,2 14
Flexural strength MPa  ISO 178 112
Flexural modulus MPa  ISO 178 2,900
Impact strength (Charpy, Notched) kJ/m2  ISO 179/1eA 5
Temp. of deflection under load 0.45 MPa MPa  ISO 75-2 182
1.8 MPa MPa  ISO 75-2 60
Melt flow rate(235 °C/2,160 g) g/10 min  ISO 1133 9
Oxgen index %  ISO 4589 28

Impact Strength:N=not broken P=partially broken C=completely broken