Dry as molded
Characteristic Unit Test method Measured value
Mechanical Characteristics
Tensile strength MPa  ISO 527-1,2 125
Tensile strain at break % 3.0
Tensile modulus GPa 5.8
Flexural strength MPa  ISO 178 200
Flexural modulus GPa 5.3
Charpy notched impact strength kJ/m2  ISO 179-1/1eA 8
Rockwell hardness R.Scale -  ISO 2039-2 120
M.Scale 95
Thermal Characteristics
Melting temperature °C  ISO 11357 215~225
Coeff. of linear thermal expansion x10-5/°C  ISO 11359-2 -
Temperature of deflection under load 0.45 MPa °C  ISO 75-1,2 220
1.8 MPa °C 200
Electical Characterisitics
Volume resistivity Ωcm  JIS K6911 -
Electric strength kV/mm  IEC 60243-1 -
Relative permittivity -  IEC 60250 -
Arc resitance s  D-495(ASTM) -
Others
Density g/cm3  ISO 1183-3 1.25
Water absorption 23 °C, 50 %RH %  UBE method 2.5
Molding shrinkage MD %  UBE method(30x100x3t) 0.4
TD 0.7
Nomenclature accdording to ISO 16396-1 PA6, GF15. M1, S14-060