Properties
Item | Unit | Nominal value | Test method |
---|---|---|---|
MFR | g/10min | 4 | ASTM D1238 |
Density | kg/m3 | 904 | ASTM D1505 |
Melting point | ℃ | 87, 111 | UBE method |
Tensile strength | MPa | 42 | ASTM D638 |
Tensile elongation | % | 715 | ASTM D638 |
Flexural Modulus | MPa | 140 | ASTM D790 |
Izod impact strength | kJ/m2 | NB | ASTM D256 |
Hardness | (HDD) | 44 | ASTM D2240 |
Vicat softening point | ℃ | 81 | ASTM D1525 |
ESCR F50 | h | >1000 | ASTM D1693 |
* These values are typical properties and not to be considered as specifications.
* Specimens are prepared from compression-molded sheets.
Additives
- Antioxidant
Features
- Very low heat seal temperature, Transparency, Toughness, Flexibility
- Excellent in blown film molding
Applications
- Film, Sheet
- Mono and multi layer film, Modification